Moona, Girija and Rastogi, Vikas and Walia, R. S. and Sharma, Rina and Kumar, H. and Jain, P. K.
(2020)
Microstructure and Wear Study of Al 7075-T6/Eggshell/SiC/Al2O3 Hybrid Composites.
In: 1st National Conference on Advances in Mechanical Engineering (NCAME), 2019, Natl Inst Technol Delhi, Delhi, INDIA.
Abstract
In present experimental investigation, hybrid aluminium metal matrix composites were fabricated using stir casting technique by infusing eggshell particles (0.5, 1 wt%), SiC particles (1, 1.5 wt%) and Al2O3 particles (1.5, 2.5 wt%) into Al 7075-T6 metal matrix. The developed composites were further characterized for microstructures using FESEM, X-ray diffractometry and EDS techniques. Tribological behaviour investigations were carried out using a pin-on-disk tribometer for comparative study between as-cast Al 7075-T6 alloy and Al-7075-T6/Eggshell/SiC/Al2O3 composites. During dry sliding wear test at room temperature, there was a decrease of 33% in wear rate, 20% in coefficient of friction and 20% in frictional force of composites, whereas in presence of lubricant, the developed composites exhibited maximum reduction of 85% in wear rate, 46% in coefficient of friction and 46% in frictional force as compared to their unreinforced counterparts. Due to augmented tribological properties, fabricated hybrid composites can reasonably be used for lightweight wear-resistant applications.
Actions (login required)
|
View Item |